How to enter BIOS settings

• Connect power to Bedrock V3000 then press (DEL / ESC) continuously until BIOS screen shows up.

Make BIOS screen look better on console

• Advanced > Serial Port Console Redirection > Console Redirection Settings set terminal type: VT-UTF8

• save and reset

How to check BIOS version

• Enter BIOS settings

• In Main tab look for Project Version

  Open

  

• The Project Version string has the format 0ASCSK 0.00.0XX
  XX is the BIOS version

Main screen

Open

Power screen

• CPU Power Settings:

  • Default CPU Power Settings (default setting)

  • CPU Power Limit Enabled (opens multiple settings):

    • CPU Power Limit (W): CPU power limit in watts, value entered manually

    • Core Performance Boost: Auto / Disabled

    • Global C-state Control: Auto / Disabled / Enabled

  • dvanced CPU Power Settings (opens multiple settings):

    • Core Performance Boost: Auto / Disabled

    • Global C-state Control: Auto / Disabled / Enabled

    • Platform Management Framework (PMF): → AMD PBS → AMD CBS → SMU Common Options

    • System-Management-Unit-(SMU): → AMD CBS → SMU Common Options

    • Power Saving Configurations: → AMD PBS → Power Saving Configurations

    • Thermal Configurations: → AMD PBS → Thermal Configurations

Advanced screen

• Displays 4 Intel NICs if they are present and flashed:

  • when chosen displays brief NIC info, link status and MAC address.

• Driver Health: displays Intel NICs driver status: Healthy / Not Healty.

Chipset screen

Security screen

Boot screen

Save & Exit screen