Bedrock Mounting options
- Irad Stavi
The compact footprint of Bedrock, robust structure, effective fanless cooling and DC input tolerance simplify Bedrock integration. All Bedrock I/O is brought to the front panel, with DC input and antennas in the top panel. The bottom and rear panel are both reserved for mounting, allowing full usability while Bedrock is mounted to a wall or to a desk.
SolidRun offers multiple types of mounting brackets, including lever-based DIN-Rail bracket with locking, wall mount, small stand and ruggedized stand.
Table of Content
DIN-Rail mounting
Bedrock is designed for effective deployment as a DIN Rail mounted IPC with the following features:
Small, thin and shallow form factor
Passive cooling from both sides
All connectors and indicators on the front panel. Power and antennas on the top panel
No vents
Fortified rear panel for mounting
SolidRun offers an advanced DIN Rail mounting bracket for Bedrock PC with the following features:
All metal bracket (aluminum body and hardened steel latch)
Easy positioning by lowering the IPC onto the DIN rail
Zero-force mounting (without spring loading)
Low-force clamping mechanism with easy access
Quick dismounting and remounting
Bracket locking prevents accidental dismounting
DIN Rail mounting bracket ordering PN: SRBD-DIN21
DIN Rail bracket assembly and usage diagrams
Wall mounting
Bedrock Wall Mounting Bracket is designed for simple one-time fixing Bedrock to a wall using only two screws.
The bracket has the following features:
Anodized aluminum Made by CNC
Ensures space below and above the computer for effective convection cooling
Easy access to connectors and indicators
Robustness - Bedrock is screwed to the bracket, then bracket is screwed to the wall
Wall mounting bracket ordering PN: SRBD-WALL21
Stand
The Bedrock Stand is designed for using Bedrock on a desk. It elevates Bedrock above the desk for cooling and keeps it stable in vertical position.
The stand is made of aluminum by CNC with anodize finish and has anti-slip slicone rubber sole.
All Bedrock features are accessible without removing the Stand.
The Stand is recommended for Bedrock evaluation.
Stand ordering PN: SRBD-STAND21
Bedrock Tile mounting
When integrating an IPC in tight space convection cooling becomes ineffective and is better replaced with conduction cooling. It is also desirable to make the IPC as compact and thin as possible.
Bedrock Tile is designed for these use cases. The ribbed chassis walls are replaced with flat walls with blind threadings for fastening Bedrock Tile to a cold plate. A key feature of Bedrock Tile is that it preserves the 360º internal heat distribution so it can be cooled from either side. With thickness of just 29mm and volume of 0.6 liter, Bedrock Tile is easy to integrate in tight spaces. Having all connectors on one side further simplifies the integration.
See also:
Designing custom mounting for Bedrock PC
Mounting guidelines
For effective passive cooling of Bedrock please consider the following:
Bedrock should be positioned vertically.
This allows effective airflow along Bedrock external cooling ribs which is important for effective convection cooling.
Note: If Bedrock has to be positioned in another orientation, it is advised to supplement Bedrock with active cooling (e.g. a cabinet fan).Provide a space of 20mm above Bedrock and 20mm below Bedrock.
This is to ensure effective airflow. If Bedrock is installed just below a ceiling, hot air might stay trapped around Bedrock, significantly reducing convection cooling performance. If insufficient gap is left below Bedrock then air intake is reduced (in particular for Bedrock 60W enclosure), reducing convection cooling performance.Provide a space of 10mm on both sides of Bedrock.
This allows uninterrupted airflow along Bedrock external cooling ribs.
Bedrock threaded holes for mounting
In rear panel: 2x M3 threadings. Depth 3mm
In bottom panel: 2x M4 threadings, depth 6mm
See also: Bedrock 3D model
SolidRun Ltd.