Custom logoCustom icon
Templates

Developer Center

  • All content
  • Space settings
  • Community Forums
    Community Forums
     This trigger is hidden
  • Technical Support
    Technical Support
     This trigger is hidden
  • Pinout Planner Tool
    Pinout Planner Tool
     This trigger is hidden
  • SolidRun Website
    SolidRun Website
     This trigger is hidden
  • SolidRun GitHub
    SolidRun GitHub
     This trigger is hidden
  • Ready to Boot Images
    Ready to Boot Images
     This trigger is hidden
Results will update as you type.
  • IoT & Industrial Product Line
    • HAILO 15 Based Porducs
    • NXP i.MX8 Based Products
    • Renesas RZ/G2 Based Products
    • TI AM64x Based Products
    • NXP i.MX6 Based Products
      • i.MX6 SOM Hardware User Manual
      • HummingBoard i.MX6 SBC Quick Start Guide
      • CuBox-i Quick Start Guide
      • i.MX6 Software
      • i.MX6 Other Articles
        • Boot from USB OTG - i.MX6
        • i.MX6 PCB rev 1.9 and 2.0 - Analog Devices PHY
        • i.MX6 PCB rev 1.9 - AzureWave AW-NM372SM support
        • i.MX6 Application Note – Connecting Parallel Camera
        • i.MX6 Application Note – Thermal Analysis
        • i.MX6 Application Note – Suspend to Memory Power Measurements
        • OV5640/OV5642 Camera Sensor
        • HDMI and LVDS Displays for HummingBoard
        • i.MX6 Carriers RTC Overview
        • i.MX6 mikroBUS
        • i.MX6 GPU/VPU
        • WPE Webkit
        • RAK833 – LoRaGateway – Debian
        • RAK833 – LoRaGateway – Yocto
        • HummingBoard CBi RS485 and CANBus pin mapping
        • i.MX6 SOM available I/Os
        • i.MX6 SOM boot configuration pins
        • Cellular Modules
        • HummingBoard CBi RS485 and CAN bus
        • HummingBoard Pro/Base GPIOs
        • HummingBoard Edge/Gate/CBi GPIO Pins Control
        • i.MX6 Reset Button
        • Installing and booting an image on i.MX6 SOM eMMC
        • Changing the IR protocol under Linux
        • i.MX6 HummingBoard – CAN bus
        • HummingBoard Edge/Gate GPIOs
        • Serial-Console USB->UART
        • eFuses for i.MX6 SOM
        • eFuses for i.MX6 SOM (Developers page)
        • HummingBoard Gate/Edge UART console
        • HummingBoard Edge/Gate Boot Jumpers
        • i.MX6 Rev 1.9 and Rev 2.0 ADIN1300 PHY Qualification Process
        • i.MX6 Dual-lite with 2GB DDR
    • Intel Braswell IB8000/IB3710
    • Bedrock SOM V3000 / R7000 / R8000 - Hardware User Manual
  • Networking Product Line
  • SolidSense
  • Bedrock PC
  • Other Articles
  • Pinout Planner Tool Guide
You‘re viewing this with anonymous access, so some content might be blocked.