/
HummingBoard CBi RS485 and CANBus pin mapping

HummingBoard CBi RS485 and CANBus pin mapping

Owned by Kareiman Fadly (Unlicensed)
Last updated: Jan 25, 2022 by SolidRun
1 min read

Introduction

The following sections describes the pin mapping of the HummingBoard CBi RS485 and CANBus interfaces.

In both those two interfaces Phoenix Contact part number 1757255 connector is being used.

RS485

The pin mapping on the HummingBoard CBi RS485 connector is as follows;

 

CANBus interface

 

More information

For more information please reference the board schematics HummingBoard CBi Quick Start Guide .

 

Related content

HummingBoard CBi RS485 and CAN bus
HummingBoard CBi RS485 and CAN bus
Developer Center
More like this
i.MX6 HummingBoard – CAN bus
i.MX6 HummingBoard – CAN bus
Developer Center
More like this
HummingBoard CBi Quick Start Guide
HummingBoard CBi Quick Start Guide
Developer Center
More like this
HummingBoard Edge/Gate/CBi GPIO Pins Control
HummingBoard Edge/Gate/CBi GPIO Pins Control
Developer Center
More like this
HummingBoard Edge/Gate GPIOs
HummingBoard Edge/Gate GPIOs
Developer Center
More like this
Serial-Console USB->UART
Serial-Console USB->UART
Developer Center
Read with this

SolidRun Ltd.