HummingBoard Edge/Gate Boot Jumpers


Only available for HummingBoard Gate/Edge rev 1.3 and above!

On the HummingBoard Gate/Edge it is possible to boot from different media – without blowing the eFuses.

Jumpers need to be setup at J5005

To boot from:

  • eMMC 3 jumpers will be needed: (1+2),(3+4), (7+8)

  • MicroSD 2 jumpers will be needed: (3+4), (5+6)

  • M.2 SATA SSD: 1 jumper will be needed: (1+2)

  • USB OTG: No jumpers needed: ensure that no jumpers are connected

SolidRun Ltd.