...
Before powering up the board for the first time it is recommended to select the boot media. In order to configure the boot media, please refer to ClearFog GTR Boot Select .
Booting from an eMMC card
...
| Tip |
|---|
The ClearFog GTR including U-Boot into eMMC by default. Note: Here can find the U-Boot Binaries - https://images.solid-run.com/A38X/U-Boot SolidRun Images |
Once you set the switches, you can apply the following for booting from an eMMC card.
...
For more information, please visit Flashing an SD Card .
Note: Plug a USB Disk into your Linux PC, the following assumes that the USB is added as /dev/sdX and all it’s partitions are unmounted.
...
Please insert the micro USB into your device, then you can refer to Serial Connection for installing necessary serial connection software in Linux/Windows.
...
For some SFP modules that work on SolidRun networking hardware platforms, please refer to SFP Modules .
SIM Card Slot
It is possible to utilize a Cellular connection by inserting a SIM card into the SIM card slot. Please observe that a GSM Cellular modem needs to be installed utilizing the mini PCIe connection in order to exploit the cellular connection.
List Of Supported OS
Build U-Boot & kernel from sources
U-Boot Build - A38X U-Boot
Kernel Build - A38X Kernel
...