Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Bluetooth LED

Bluetooth LED does not work

RJ45 LEDs

Swapped RJ45 LEDs in ports 3,4.
Applies only to early Bedrock V3000 units

There was an error where the voltage PMIC was flashed with incorrect values on early bedrock units.
If you’re experiencing random problems or failures when booting, try the following instructions to check if your voltage PMIC has the correct values:

  • download the RyzenAdj utility to your bedrock device:

Download RyzenAdj utility

  • run: ./ryzenadj -i | grep "TDC VALUE VDD"

I if the value you see is greater than 2.8 on idle then your voltage PMIC is flashed with the correct values.

  • No labels