SolidPC Testpoints

Owned by Kareiman Fadly (Unlicensed)
Last updated: Apr 19, 2022
2 min read

 

Revision and Notes

Date

Owner

Revision

Notes

Date

Owner

Revision

Notes

Apr 19, 2022

 

1.0

Initial release

Table of Contents

Description

Testpoints are designed to provide a secure anchoring point on a printed circuit board for j-hooks and miniature test leads.

Carrierboard (Silk)


Testpoints

Power management

GPIOs and misc

MCU: STM32PA1..PA4 pins

Missing TP-names on PCB:

Few TP points are not named on the pcb:

  • TP27

  • TP21

  • TP6

  • TP7

  • TP8

  • TP3

  • TP4

  • TP5

Please see the pictures below:

Detect all I2C busses

This patch can be used if not all I2C busses are detected:

--- drivers/i2c/busses/i2c-designware-baytrail.c 2016-10-22 12:41:00.000000000 +0200 +++ /tmp/i2c-designware-baytrail.c 2016-10-26 15:05:42.936807731 +0200 @@ -22,7 +22,7 @@ #include "i2c-designware-core.h" #define SEMAPHORE_TIMEOUT 100 -#define PUNIT_SEMAPHORE 0x7 +#define PUNIT_SEMAPHORE 0x10e #define PUNIT_SEMAPHORE_BIT BIT(0) #define PUNIT_SEMAPHORE_ACQUIRE BIT(1)

 

SolidRun Ltd.