Renesas RZ Features

Internet

Connect an Ethernet cable to your HummingBoard Pulse (for internet access during boot-up).
Models HummingBoard with WiFi, can be connected via WiFi or wired Ethernet.

Please check you Ethernet connection.
Use the following commands in order to keep your system up-to-date:

apt-get update 
apt-get upgrade 
reboot

For more detailed information, please refer to RZ/G2LC Debian .

WiFi

You can connect to WiFi using any application, such as : connmanctl or wpa_spplicant.

An example for connecting to WiFi using wpa_supplicant:

To bring a WiFi interface up, run the following :

$ ifconfig wlan0 up

To discover your wireless network interface name, see Network Interfaces.

Install the wpa_supplicant package:

$ apt-get install wpasupplicant

Edit network interfaces file :

At the bottom of the file, add the following lines to allow wlan as a network connection:

cat <<EOF > /etc/network/interfaces.d/wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
EOF

Create a configuration file with the relevant ssid:

cat <<EOF > /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/run/wpa_supplicant
update_config=1
network={
    ssid="MYSSID"
    psk="passphrase" 
}
EOF

Check your personal ssids by running : ‘iw dev wlan0 scan’

Make sure it works:

Restart your device and it should connect to the wireless network. You can check it by running the command $ iwconfig . If it doesn't, repeat above steps or get help from an adult.

For more information about using wpa_supplicant , you can refer to wpa_supplicant or wpa_supplicant.

Bluetooth

For showing all Bluetooth devices, run the following:

$ apt-get install bluez
$ bluetoothctl

Turn the device on:

[bluetooth]# power on

Make your Bluetooth detectable by other devices:

[bluetooth]# discoverable on

If you want to connect to other devices:

Start by scanning for other Bluetooth devices:

[bluetooth]# scan on

Choose a MAC address and connect :

[bluetooth]# pair $MAC

You can check the pairing list between the devices by writing :

[bluetooth]# paired-devices

Cellular Modem

The cellular modem is a more fully featured extension of which contains a cellular module with additional hardware interfaces and a SIM card slot.

You can connect your cellular modem to the mPCIe, and insert a SIM card.

How to connect to the network:
1. Install “modemmanager” package on your debian.

 $ sudo apt install modemmanager

2. Search for your modem location:

$ mmcli -L

3. Connect to your modem:

$ mmcli --modem=/your/modem/location

4. Enable the modem:

$ mmcli --modem=/your/modem/location -e

5. Scan for networks:

$ mmcli --modem=/your/modem/location --3gpp-scan

6. connect to 3gpp network:

$ mmcli --modem=/your/modem/location --3gpp-register-in-operator=<network ID>

7. Make sure the connection was created:

$ mmcli --modem=/your/modem/location

For some cellular modules to be connected, please refer to Cellular Modules .

GUI On Debian

There is an option with the Debian image, up to the user, to work with a GUI like Weston, GNOME and etc.
For applying this option do the following steps:

First, connect your device to a screen using the working output (HDMI / uHDMI).

For working with Weston GUI:

Install the Weston package.
```
sudo apt install weston
```

Set the XDG_RUNTIME_DIR env param.

cat << 'EOF' > /etc/profile.d/weston.sh
if test -z "$XDG_RUNTIME_DIR"; then
    export XDG_RUNTIME_DIR=/run/user/`id -u`
    if ! test -d "${XDG_RUNTIME_DIR}"; then
        # Make a directory for the output of the Weston GUI
        mkdir --parents "${XDG_RUNTIME_DIR}"
        chmod 0700 "${XDG_RUNTIME_DIR}"
    fi
fi
EOF

Restart the system
```
reboot
```
Start Weston
```
weston
```

Run the weston command on the Dissplay console using keyboard (PHYSICAL TERMINAL not serial session or remote connection)

For working with GNOME GUI on top of Xorg:

Install Xorg.
```
$ sudo apt install xorg
```
Install your desired gnome.
```
$ sudo apt install gnome-session
```
NOTE: ‘gnome-session’ is an example of gnome that we can work with, you can replace the ‘session' with another GNOME extention.
Start your GNOME GUI.
```
$ sudo systemctl start gdm
```
- For logging in you need a user on your device to log into it. You can create one before step 3 by this command (replace the ‘username’ with name that you want) :
```
$ sudo adduser username
```
- You can jump between GUIs that you install (like gnome-session) by the setting button that locates in the down right corner of the home screen.