ClearFog Base/Pro GPIO Pins Control

To control on the GPIO pins:

The external GPIOs are available under the /sys/class/gpio folder in Linux.
To control on the GPIO pins you need to calculate the GPIO number XX and run the commands below:

# Export GPIO XX
echo XX > /sys/class/gpio/export

# Set GPIO pin Direction
echo "out" > /sys/class/gpio/gpioXX/direction
or
echo "in" > /sys/class/gpio/gpioXX/direction

# Set the value of an output pin
echo 1 > /sys/class/gpio/gpioXX/value
or
echo 0 > /sys/class/gpio/gpioXX/value

# Get the value of an input pin
cat > /sys/class/gpio/gpioXX/value

# Unexport GPIO XX
echo XX > /sys/class/gpio/unexport

This is an example code for accessing the GPIOs on the ClearFog Base/Pro:

#An example for gpio 22

# Export GPIO XX
cd /sys/class/gpio/ 
echo 22 > export 

cd gpio22/ 

# Set GPIO pin Direction
echo out > direction 

# Set the value of an output pin
echo 0 > value