/
Bedrock Enabling Quectel EM05-G LTE Modem

Bedrock Enabling Quectel EM05-G LTE Modem

Introduction

This documentation provides a comprehensive guide on enabling the Quectel EM05-G LTE Modem.
With this guide, users can seamlessly set up the modem in their environment.

Prerequisites

  • Hardware requirements: Bedrock V3000 with Quectel EM05-G Modem

  • Software requirements: Linux Environment

Configuration

  • Boot into your Linux environmment

  • Run the following Commands:

modprobe option echo "2c7c 030e" > /sys/bus/usb-serial/drivers/option1/new_id modprobe cdc_mbim
  • It might take a few seconds for the Modem and required services to start working

Testing and Verification

  • Run:

mmcli -L
  • This will list Your modem, Example:

/org/freedesktop/ModemManager1/Modem/0 [Quectel] Quectel EM05-G

 

References

  1. Quectel Official Website

  2. EM05-G AT-commands

Related content

Setting up a data connection over QMI interface using libqmi
Setting up a data connection over QMI interface using libqmi
More like this
Bedrock Windows Drivers
Bedrock Windows Drivers
More like this
Using serial console with Bedrock V3000
Using serial console with Bedrock V3000
More like this
Installing OPNsense
Installing OPNsense
More like this
Installing and upgrading RAM, storage and devices in Bedrock
Installing and upgrading RAM, storage and devices in Bedrock
More like this
ClearFog A388 Base Quick Start Guide
ClearFog A388 Base Quick Start Guide
More like this

SolidRun Ltd.