Before powering up a board for the first time it is recommended to select specific boot media. In order to configure the boot media to please reference one of below diagrams according to which SoM is used:
The black rectangle represents the switch position. |
The black rectangle represents the switch position. |
This is the original i.MX8M SoM, the first in SolidRun i.MX8 family.
Please note , after HummingBoard Pulse/Ripple revision 2.3 and up the dip switch has been changed and the following description applies.
The black rectangle represents the switch position. |
The black rectangle represents the switch position. |