...

Bedrock R7000 Basic has four display outputs (1x HDMI, 2x mini-DP, 1x full size DP).

Full The full size DP does not function with BIOS older than Jan-2025.

Solution

Update BIOS

Root cause

Internal port configuration issue involving the SoC firmware and BIOS.

Workaround

Use the other ports for connecting displays.

10G USB Hot plug doesn't work

Due to some power management issues, the USB ports hot plug is disabled.
You can prevent the OS from using the ACPI power management policies by using this workaround.
https://solidrun.atlassian.net/wiki/spaces/developer/pages/666370082/Bedrock+Troubleshooting#USB-10G-(Closest-to-console-port)-hotplug-doesn%27t-work

Console port displays gibberish in OS environment (NIO 4X25 specific)

The console connection works in BIOS environment but displays gibberish in an OS environment.
Solidrun is working on a solution.

Older Bedrock with Ryzen HS do not support DDR5 4800

Symptom

Bedrock does not boot if DDR5 is set to 4800 MT/s or lower. Works with DDR5 set to 5600 MT/s.
If BIOS default is set to 4800 MT/s on an old Bedrock with Ryzen HS Bedrock is bricked and should be returned by RMA.

Applies to

Bedrock R7840HS | R8845HS with SN earlier than B7D-241101-000

Root cause

Reducing DDR5 frequency results in unsupported DDR voltage setting

Solution

DDR5 voltage circuit is revised for all units starting from B7D-241101-000

Work around

Install BIOS for Ryzen HS that defaults to DDR5 5600 MT/s.

If DDR5 setting was changed and Bedrock does not boot, then reset BIOS.