...
The MFGTool provided by Freescale requires a Windows based PC, prefereably with an intel based chipset. (Freescale’s detection routines in the MFGTool can be picky when it comes to chipsets.)
Download the SolidRun-MicroSOM-Fusing.zip archive and unzip it to a known location. (Download from i.MX6 SOM Hardware User Manual page)
Choose the right directory according to the i.MX6 device (either solo/dual lite OR dual/quad).
Double click on the mfgtool2.exe
Connect one side of the USB host to host cable to your PC and other to the upper USB port of CuBox-i or HummingBoard carrier with the intended SOM to configure connected.
Power up the CuBox-i / HummingBoard
On the Windows mfgtool2.exe you would notice a second slider that indicates that u-boot is being downloaded
Done. If you are using CuBox-i as a carrier for blowing fuses then the front LED will blink 3 times, the number of fuses that where blown.
...