Versions Compared

Version Old Version 9 New Version Current
Changes made by

Yazan Shhady

Josua Mayer

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

SolidSense N8 IoT Compact BLE
SRG0401.0XSY {x=1,2; Y=D,W}

SolidSense N8 IoT Compact LTE BLE
SRG0402.0XSY {x=1,2; Y=D,W}

SolidSense N8 IoT Compact Extended
SRG0403.0XSY {x=1,2; Y=D,W}

SolidSense N8 IoT Compact Extended LTE
SRG0404.0XSY {x=1,2; Y=D,W}

I/Os

1 x USB 2.0
1 x BLE 5.0 (SDR based on nRF52832 – Wirepas Compatible)

1 x USB 2.0
1 x BLE 5.0 (SDR based on nRF52832 – Wirepas Compatible)

1 x RS485
1 x CAN
1 x USB 2.0

1 x RS485
1 x CAN
1 x USB 2.0

Networking

1 x Ethernet RJ45 10/100/1000
1 x 802.11 a/b/g/n/ac WiFi and Bluetooth 5.0

1 x Ethernet RJ45 10/100/1000
1 x 802.11 a/b/g/n/ac WiFi and Bluetooth 5.0
1 x LTE Cat 4 Worldwide + GPS (with fallback on 3G/2G)

1 x Ethernet RJ45 10/100/1000
1 x 802.11 a/b/g/n/ac WiFi and Bluetooth 5.0

1 x Ethernet RJ45 10/100/1000
1 x 802.11 a/b/g/n/ac WiFi and Bluetooth 5.0
1 x LTE Cat 4 Worldwide + GPS (with fallback on 3G/2G)

Processor

NXP i.MX 8M Nano Arm Cortex A53 Single core @1500MHz + Cortex M7@650MHz

NXP i.MX 8M Nano Arm Cortex A53 Single core @1500MHz + Cortex M7@650MHz

NXP i.MX 8M Nano Arm Cortex A53 Single core @1500MHz + Cortex M7@650MHz

NXP i.MX 8M Nano Arm Cortex A53 Single core @1500MHz + Cortex M7@650MHz

Memory & Storage

1GB DDR4
8GB eMMC
MicroSD

1GB DDR4
8GB eMMC
MicroSD

1GB DDR4
8GB eMMC
MicroSD

1GB DDR4
8GB eMMC
MicroSD

Misc.

Programmable LEDs
Supercap protection
RTC w/ battery

Programmable LEDs
Supercap protection
RTC w/ battery

Programmable LEDs
Supercap protection
RTC w/ battery

Programmable LEDs
Supercap protection
RTC w/ battery

Development and Debug interfaces

Console port (internal)

Console port (internal)

Console port (internal)

Console port (internal)

Power

9V-36V
PoE sink

9V-36V

9V-36V
PoE sink

9V-36V

Expansion card I/Os ( * )

1 x internal expansion header

1 x internal expansion header

1 x internal expansion header

1 x internal expansion header

Temperature

0°C to 50°C

0°C to 50°C

0°C to 50°C

0°C to 50°C

Dimensions

150 x 85 x 40mm

150 x 85 x 40mm

150 x 85 x 40mm

150 x 85 x 40mm

Enclosure

Plastic casing with internal antennas for WiFi-Bluetooth/BLE

Plastic casing with internal antenna for WiFi-Bluetooth. One SMA port for LTE.

Plastic casing with internal antenna for WiFi-Bluetooth

Plastic casing with internal antenna for WiFi-Bluetooth. One SMA port for LTE.

Info

Please Note

(*) Only accessible with case open.

  • All SRG40X.01SD {X: 1, 2, 5} SKUs comes with U-Blox Nina-B1 (U-Blox comes with BLE FW by default except if you order the version with SW except SD like SRG40x.01SW will come with Wirepass FW )

  • All SRG40X.02SD {X: 1, 2, 5} SKUs comes with fwm7blz22 (FWM7BLZ22 comes with BLE FW by default except if you order the version with SW except SD like SRG40x.02SW will come with Wirepass FW )

  • SRG405.02SD = full assembled (including all options in the list...)
    -> SolidSense N8 Compact - WiFi BLE-FWM LTE POE RS485 CAN ETH-ADIN

...

Please see below the features overview of the front side of the product.

...

Note
The unit has two Dual-Band Antennas (for WIFI Module and U-Blox): RF ANT 2.4GHZ/5.4GHZ FLAT PATCH .

...

Support

Please follow our SolidSense Support Overview page.

...