Page Comparison

...

• When you see the main boot menu:

  

• Press "esc" or the arrow buttons to go to the boot option shell 

• Set the console redirection (copy to the terminal): 

  • set hw.uart.console="mm:0xfedc9000,rs:2" 

    • NOTE: the line you paste might look a little weird especially if you type it manually 
      example for copy: /K |et hw.uart.console="mm:0xfedc9000,rs:2" 
      example for manual typetyping: \e|/-\|/r-\co|sol/-\|m:/x-ed\9|0/-\|:/" 
      THIS IS FINE AS LONG AS THE ACTUAL INPUT TEXT IS CORRECT 

  • Type boot  boot 

• After the system has booted you are prompted with a login 

  • To use it as a live system you can login as: 

    • Username: root 

    • Password: opnsense 

  • To install OPNsense login as: 

    • Username: installer 

    • Password: opnsense 

    • From here on, I will reffer to the installer option: 

• Choose keymap

  

...

• Choose Partition scheme to be installed
  

  Image Removed

  Choose: UFS Select UFS GPT/UEFI Hybrid Hybrid

  Image Added

• Choose disk

  

• Decide about swap partition 

  

...