Boot Select
Before powering up the board for the first time it is recommended to select the boot media. Hailo 15 SOM has two boot options: eMMC boot (main option) and UART firmware update mode.
Using HummingBoard IIoT
S5 DIP switch should be modified.
eMMC boot:
Switch # | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
Position | Off | Off | Off | Off | Off | Off |
UART boot:
Switch # | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
Position | Off | On | Off | Off | Off | Of |
Using HummingBoard Ripple/Pulse/Pro
S3 DIP switch should be modified.
eMMC boot:
Switch # | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
Position | Off | Off | Off | Off | Off | On |
UART boot:
Switch # | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
Position | On | Off | Off | Off | Off | On |