...
Currently mv-ddr-marvell and atf are taken from the mainline, however, u-boot and mrvl_scp_bl2.img are still not public and must be taken from marvell SDK10, or get the binaries from SolidRun GitHub at https://github.com/GitHub - SolidRun/cn913x_build.git .
Build Instructions
Fetch sources
...
| Code Block |
|---|
# start USB stack usb start # scanning usb for storage devices... 1 Storage Device(s) found <-- indicates success # load flash-image.bin to ram load usb 0:1 $kernel_addr_r flash-image.bin # u-boot will indicate how many btes were read. Make sure to verify the number! # initialize spi flash sf probe # optionally erase sf erase 0 0x800000 # finally write loaded file sf write $kernel_addr_r 0 0x$filesize |
https://github.com/SolidRun/u-boot-armada38x/blob/u-boot-2013.01-15t1-clearfog/download-serial.sh
An example is as follows -
...
Embedded in download-serial.sh a small C program that gets built every time the script runs and requires curses libraries.
Verified Boot
TBD Read more here: Verified Boot