...
In AMI utilities directory go to:
afu\afuwin\64\
Unzip the afuwin64.zip file and enter the extracted directory
Open cmd and navigate to the directory where you extracted afuwin
Run:
AFUWINx64 PATH<YOUR_TO_BIOS_IMAGE_FILE IMAGE> /P /B /K
It is recommended to paste the BIOS image in the same directory
Press y to restart the system
In BIOS environment set:
Reset NVRAM: Enabled
Boot Block Update : Enabled
Select “Proceed with flash update“
After the update is finished, press any key to reboot the system
...
Copy the files to the USB Drive you created in the Create EFI shell bootable USB drive section
Boot Bedrock to EFI shell
Identify your drive as FS#: (where # could be 1,2,3,…..)
Select the correct drive using:
FS#:
You can navigate to your files using: 'lsdir' and 'cd' (if you chose to place in a different directory)
Run:
AfuEfix64.efi <YOUR_BIOS_IMAGE> /P /B /K /N
Press y to restart the system
In BIOS environment make sure the following settings are set to:
Reset NVRAM: Enabled
Boot Block Update : Enabled
Select “Proceed with flash update“
After the update is finished, press any key to reboot the system