This step takes place on a host PC running Linux.
...
download the required disk image file
...
Connect a USB thumb drive to your pc
...
Run command: lsblk
...
Identify your drive (usually /dev/sdX, X can be different for each system)
NOTE: SATA HDDs & SSDs also identify as sdX so be careful not to corrupt your data.
...
unmount your drive from the system
ususally will be: sudo umount
...
Run command:sudo dd if=${path/to/image/file} of=/dev/sdX bs=1M status=progress; sync
...
| Include Page | ||||
|---|---|---|---|---|
|