Page Comparison

...

• Press "esc" or the arrow buttons to go to the boot option shell 

• Set the console redirection (copy to the terminal): 

  • Code Block
    set hw.uart.console="mm:0xfedc9000,rs:2" boot

    • NOTE: on older versions, the line you paste might look a little weird especially if you type it manually
      example for copy: /K |et hw.uart.console="mm:0xfedc9000,rs:2" 
      example for manual type: \e|/-\|/r-\co|sol/-\|m:/x-ed\9|0/-\|:/" 
      THIS IS FINE AS LONG AS THE ACTUAL TEXT WAS TYPED CORRECTLY

• Type boot 

• You will be prompted with a console type selection, tested on console type vt100

  • NOTE: (it’s the default option so you can just press enter) 

• Accept copyright and distribution notice 

  

• Choose Install pfSense

  

...