Revisions and Notes
...
You can Install U-Boot binaries from SolidRun Images site.
3. Set the swhiches on the boot source selector as follows:
...
4. Serial connection
Connect your micro USB cable to your device.
You can refer to the serial connection section in one of our quick start guide pages - Cubox-M, HummingBoard Pulse.
45. Connect the Male to Male USB-A cable to the OTG port on your device.
| Info |
|---|
Identify the OTG port |
Make sure you can detect the USB = NXP Semiconductors in the usb devices list.
56. Use the following commands for loading the U-Boot:
...