| Note |
|---|
Please Note This article is still a work in progress and is not including enough information to fully define autonomously the provisioning of a new custom configuration. It is here as a first reference and we are working hard to complete it ASAPThe documentation for SolidSense software is not maintained by SolidRun and the information herein is not actual with the latest version of the software, please contact our partner SolidSense Connect who is now developing the SolidSense software. |
The documentation for SolidSense software is not maintained by SolidRun and the information herein is not actual with the latest version of the software, please contact our partner SolidSense Connect who is now developing the SolidSense software.
Introduction
Configuring the gateway with the customized configuration can become a burden if many gateways have to be configured. To address this problem a provisioning service has been develop and allow to define any configuration from a YAML definition file. There is a generic minimum configuration part of the factory (read-only) image that allows a basic start of the system allowing further configurations via Kura. On top, a custom configuration can be defined that will override and/or augment the basic configuration to create the operational configuration needed for the application. With that service we can have gateways that start and go into service without any on site provisioning activities.
...