SD Card
You will need to download an operating system for the HummingBoard Rz/G2LC and flash in to a blank SD card in order to use the system. You can download official release distributions and find flashing instructions at our software page. If you need help to flash the SD card please see our article Flashing an SD Card .
When using RZ/G2LC SOM
Boot Select
Before powering up the board for the first time it is recommended to select the boot media. In order to configure the boot media to please reference the below diagram :
| Info |
|---|
The black rectangle represents the switch position. |
SD boot (Dip-Switch) [S3 = {1:off, 2:off, 3:off,4-5: N/C, 6:on}]