...
The external GPIOs are available under the /sys/class/gpio folder in Linux.
To control on the GPIO pins you need to calculate the GPIO number XX and run the commands below:
| Code Block |
|---|
# Export GPIO XX
echo XX > /sys/class/gpio/export
# Set GPIO pin Direction
echo "out" > /sys/class/gpio/gpioXX/direction
or
echo "in" > /sys/class/gpio/gpioXX/direction
# Set the value of an output pin
echo 1 > /sys/class/gpio/gpioXX/value
or
echo 0 > /sys/class/gpio/gpioXX/value
# Get the value of an input pin
cat > /sys/class/gpio/gpioXX/value
# Unexport GPIO XX
echo XX > /sys/class/gpio/unexport |
This is an example code for accessing the GPIOs on the ClearFog Base/Pro:
...